High quality brass Brazing Rods for carbide brazing:
Brazing is the process of joining two independent pieces of metal to form one strong load-bearing joint. As a professional manufacturer of tungsten carbide products, our tungsten carbide components are commonly joined to steels and other materials by brazing.
Our main products include silver-based brazing filler metal, copper-based brazing filler metal, aluminum-based brazing filler metal and associated brazing flux, flux-cored welding wire etc.
Our brazing material is available in shape of rod, ring, sheet, strip, wire etc.
HS221 is a kind of copper and zinc brazing alloy, and available for gaseous flame brazing, high frequency brazing, furnace brazing, resistance welding etc. HS221 has good welding performance, and it is widely used for brazing of copper and copper alloy, steel, copper nickel alloy, gray cast iron, cemented carbide etc.
| Item Name |
Brass Brazing Rods for carbide brazing |
| Diameter: |
1.6mm-5.0mm |
| Length: |
450mm-1000mm |
| Chemical Composition: |
Cu-60%, Zinc-40% |
| Melting RangeºC: |
SOLIDUS- 890ºC, LIQUIDUS-905ºC |
| Packaging Details: |
1&2kg/bag 15&20kg/CTN 500kg/wooden box |
| Customer design: |
We can make it to your special request. |
Steps for Brazing:
- Use the wire brush or emery cloth to scuff the surface of the metal. Then clean the surfaces using soapy water or a degreaser.
- Position the metal as desired. In most cases, an overlapped joint will be stronger and braze together easier than a gapped joint. If needed, use clamps to secure the pieces in position.
- Heat the joint where the two pieces of metal will meet until the joint glows.
- Apply the brazing rod to the joint while continuing to heat the metal surfaces. For large areas, heat portions of the joint to temperature and then move to the next adjacent area.
- After brazing, use a wire brush to clean the brazed surface to remove any oxidation or residue.
Quality Control System: We always follow the high quality standard for production, from the material preparing to final product ready, all product will go through 3 inspections before we send them to you. Our professional teams will take care of your product and ensure the good and stable quality for all batches.
Our regular product is tungsten carbide tips, carbide inserts, end mills,carbide saw tips,carbide mining parts, carbide rods, plates and stripes.
We also have rich experience for customized product, we make your designs become real product, which perfectly match your need. We have many successful projects on the for our clients in different countries.
Packing:
A. Standard packing
1).Plastic boxes with foam inside and carton outside.
2).Paper boxes with foam inside and carton outside.
3).Inner boxes/packing material inside and plywood box outside (for heavy product).
B. Customized packing available: We can do special packing based on client's requirements..
Audited Supplier 
){kind=link}
){kind=link}